SpiritLand - Instructions - Bumper Stickers Decals

SPIRITLAND - Aussie Stickers, Australiana Decals, Australian Flags

INSTRUCTIONS: For Applying a SpiritLand Sicker

Turn on your speakers and

watch the 3 minute video

A picture's worth a thousand

words - Thanks MyRide

SPIRITLAND stickers are simple and easy * :

1. PICK A SPOT - most non-porous surfaces work fine: painted metal or wood in good condition, glass or smooth plastic, etc.

2. CLEAN & DRY THE SPOT - the cleaner the better and must be completely dry.

3. NOT TOO HOT & NOT TOO COLD - metal or glass in direct summer sun is too hot and mid winter cold not good.

4. START BY PEELING OFF BACKING - off one end only about 3cm and fold back on itself.

5. POSITION THE STICKER - keep the sticky end away from the surface for now.

6. CONTACT THE STICKER - press the sticker end onto the surface when you are happy with alignment.

7. PEEL THE BACKING OUT FROM UNDER THE STICKER - while slowly pulling out the backing, press on the sticker down the centre.

8. SMOOTH OUT THE AIR BUBBLES - use a credit-card or similar, or a soft rag around your thumb. Work out from the centre.

9. WIPE OF ANY EXCESS GLUE - from along the edges.

10. ENJOY!

Sticker Themes...